Videos

CO2 Blank

Added Mar 20, 2020 •

Copy this URL:
Embed code:	<iframe class="edlio-embed-player" type="text/html" width="640" height="360" src="//mis.pvpusd.net/apps/embed/?v=241216" frameborder="0" allowfullscreen></iframe> Change dimensions

Model a Co2 Blank for Parametric Modeling

Show Transcript

good morning design remodeling since you never care hope you are having a productive week in doing us some interesting at things now that we're all trapped in our houses you will have more time to work on Fusion 360 which is fibrous this is our our next item and it is a block of wood but it's real block of wood so this is a. and the series race cars RC race track we want to start we just a block though and then later we'll do some designing on the Block but the block is the next assignment for you so what I want to do is go ahead and go over to Fusion 360 now to help you design the Box normally what I would do is give you the block and you would have to take measurements off the block yourself so walk right here and then have to have a ruler this is it a metal rulers considered to be a Precision measuring tool and have to take measurements off here so you have to do the measurements to figure out what size of long has and then transfer those blocks to Fusion 360 but I do that right what I've done is given you a drawing that's attached to this lesson that has on the specifications for the both of law knowing he's the debit information you can create the block on Fusion 360 something to pause for second here and then head over to Fusion 360 okay thank you okay so it looks like we're rolling right now it's running again okay so here's our Fusion 360 screen that were familiar with and I'm going to go ahead and start a new design right here and it's the Furious here has been titled and what I want to do is go ahead and create the Curve do for myself so that they create a sketch and we get our are planes here to workout now so we want to be on the right side of the cube here throwing like this guy and that's going to bring us run out the front right here that's incorrect I'm going to come back here and I might want to go ahead and create the 2DS greatest catch lighting for me I'm to say right there we go and I want that right side view so now I can see the right side neck you hear this can allow me to create my piece so I'm going to start with a rectangle right here and it's going to head and pull out that wrecked and from my measurements what I know is this it's going to be a 70 mm tall block tab 305 so then I just hit enter into in a crate block for me so InTouch home that you can see that rectangle and then I'm going to go ahead and say finish the sketch and I'm going to extrude so I'm going to extrude this apps on a slide that out and I'm going to be able to extrude for distance here and if I look at my measurements on the drawing again this is a 42 Peter block we are working millimeters here so nothing to change on the top I just click okay and now I have my first solid so once I get a call parametric modeling I was once all of them from that I create the pieces that I want so in this case I'm going to need to do a another Scatman I want a another right side view right here looks like a surface when we say create a sketch and you'll see a physician from here now I am going to just draw a line and that line is going to start up in the upper corner which is what is a block looks like they want that corner and I'll zoom in just to get that corner pull the line all the way across I'm going to pick a random spot over you're on the other side of neck like that right there okay to get this line in position correctly and make sure I got the right I need the sketch to mention someone go sketch Dimension will see her this doesn't move to meet someone here the select the dimension and here and pull away and there and pull away so if I look on my drawing that is actually 20 mm. So I hit answer and now that is set at this point I'm finished with the sketch because this point what I want to do is go ahead and subtract this piece right here so to do that I'm going to hang cuz extrude was selected first and I'm going to actually say that's going to push this in the opposite direction so what I want to do is go ahead and push it all the way that direction so there it goes and you can see again I want to go through all and it's a cut and I click okay and that disappears of displace that piece off you'll see what awaits Tilford does exist down here in the drawing if I slide over here still there but it's been removed from this particular phone so now I'm going to go work on this surface right here I'm a pre-selected animal say creates catch that's going to Zumba what I want to do is go ahead and put points on here so I'm just going to randomly place that point right there and then I'm going to use the information I have on my schedule for my drawing to go ahead and create that correctly so I'm going to take a measurement from here to here and that is currently at 35 but if I look at my drawing that is 31.7 time and I hit enter destination from here to hear let's go get 20 but I'd like that to be at 21 since units for you so that is now centered in the correct position for birth and I can finish that sketch I want to go ahead and Kris hole which is going to go right there so you'll see the whole right here I can change have a drill point is the death that goes what type that can be cut I want to keep it nice and simple with this would be a simple whole thing they were right down the center right there I need measurements are actually correct this is going to be 52 and this is going to be 19 and we click okay and believe it or not that's the basics of how it looks now I would like to modify this and I'm going to go ahead and go to appearance we have been in here before and you've done paint clothes that one but there's also would there there are more woods but you have to download finishes you'll see right here so we're just going to go with the first word choice right here until she has some cubes that are already here so I'm going to go ahead and slide down there some different colors that you can select from I'm going to do pine and pen drive the Pine Key over and drop it right onto it and you'll see that it takes on that color there it is and that point that is actually finished so this is the finished piece on the cube that we were trying to achieve on the first part so all I can do now is go through the file and go ahead and hit save and then I need to go ahead and name this this is going to be my CO2 like I want to put the date on their 20/20 it's going into my locations going into my design remodeling shoulder and I'm going to go ahead and sit stay in a second just see it changes right here so once that is done now feel important part and I know some people have little difficulty with this place should work then I say share and I staged share public link and my screen is going to pop up for me I'll say share the latest version and it will say allowed to download I'm going to go ahead and coffee and then all I need to do is go to my email and mail at 2 Mr nimic at ninnekah pvpusd okay so there it is the modeling for the CO2 tank and hopefully

Uploaded by Campbell Nimick.

Videos

CO2 Blank

More videos from Campbell Nimick